We arrange the import of the following Petrochemicals direct from Iranian refineries and other manufacturers with full certification of quality and quantity from independent agencies. Please send us your detailed inquires for the import of any of the listed products. These products can be either imported directly by you or we can import and deliver to you.
Natural Asphalt (Gilsonite)
Natural Asphalt is a mineral mined in Iran, This is an additive used to increase the hardness of Bitumen for road pavement. Besides the main application in Road Pavement, it is also used for the following application.
Bentonite
Bentonite is an absorbent swelling clay or powder consisting mostly of montmorillonite. It usually forms from weathering of volcanic ash in seawater, which converts the volcanic glass present in the ash to clay minerals.
Carbon Black
Carbon Black is sourced from largest and the oldest manufacturer of Carbon Black in Iran. The manufacturing technology is based on a patented technology developed by Caleot Corporation.
Dodecyl Benzene
Dodecyl Benzene is used for making DDB Sulfonic Acid which is used as a raw material for making detergent powder. This product is produced only by two companies in the whole world, one being in Iran.
Heavy Alkylate
Heavy Alkylate is a by-product obtained during the Linear Alkyl Benzene production and is used for various oil base formulations like motor oil, rubber processing oil and coning oil. Since there are two manufacturers of LAB so there are only two sources of Heavy Alkylate in Iran.
Linear Alkyl Benzene
Linear Alkyl Benzene (LAB) is a superior product which is used for making LAB Sulfonate Acid (LABSA). It is most common raw material in the manufacture of biodegradable household detergents.
Low Aromatic White Spirit
White Spirit is the most widely solvent for paint and others industry. above LPG in Petro
Mono Ethylene Glycol (MEG)
Mono Ethylene Glycol (MEG) is the most widely used chemical from the Glycol family. It is an essential raw material for Polyester fibers and Polyethylene Terephthalate (PET) polymer.
Oxidised Bitumen
Oxidised Bitumen is available in low, medium and high softening point with different penetration and hardness. There are three most popular Grades i.e. 85/25, 90/15 & 115/15.
Paraffin Wax
Paraffin wax, colourless or white, somewhat translucent, hard wax consisting of a mixture of solid straight-chain hydrocarbons ranging in melting point from about 48° to 66° C (120° to 150° F). Paraffin Wax is produced only from refineries, which have wax production units.
Polyethylene Wax
It is the bye-product produced during the process of HDPE (High Density Polyethylene) and after refining it is used in food items. We directly source it from HDPE Producers of Iran.
Di-Ethylene Glycol (DEG)
Diethylene glycol (DEG) is an odorless, colorless, clear and viscose liquid with a sweet taste, which is produced from the reaction between water and ethylene oxide. In fact, it is the co-product of ethylene glycol alongside with triethylene glycol (TEG). It is miscible with water, alcohols, acetone, ether and has the chemical formula of C4H10O3.
In terms of chemicals properties, diethylene glycol is similar to MEG (mono ethylene glycol), but it has a higher specific gravity, viscosity and boiling point.
Tri-Ethylene Glycol (TEG)
Triethylene Glycol (TEG) is a viscose, odorless and colorless chemical liquid with chemical formula C6H14O4.
TEG is produced as a co-product from the reaction between ethylene oxide and water. It is miscible with water and soluble in ethanol, acetone, acetic acid, glycerine, pyridine and aldehydes. It is slightly soluble in diethyl ether, and insoluble in oil, fat and most hydrocarbons.
Sodium Carbonate (Soda Ash)
- Reduce soluble calcium in water-based muds
- Increase pH
- Flocculate spud muds
- Widely available and economical source of
carbonate ions to precipitate calcium while
increasing pH
Calcium Chloride
Onshore and offshore oil and gas producers rely heavily on custom-formulated clear brine fluids containing calcium chloride for all types of drilling and completion applications.
Calcium Carbonate
CALCIUM CARBONATE is used as a bridging agent and/or weighting material in oil base and water base dri11ing fluids, work over fluids, and completion fluids. It comes in a wide variety of particle sizes ranging from 325 mesh to 30 mesh. Custom sizing for particular applications is also available.
Caustic Soda
Economical solution to control pH Concentrated and effective at small treatment levels Increases pH which reduces corrosion of steel exposed to drilling fluids Suitable for most Water Based Drilling Muds (WBM) When treating muds with lignosulfonate or lignite,
Barite
Minimally abrasive
Essentially chemically inert and insoluble, functions only in a physical manner.
Does not react with other drilling fluid additives or interfere with their function
Hematite
Muds contain fewer solids than similar -density barite muds because of the 15% higher specific gravity.
Rheological values in muds improve; generally plastic viscosities are 2 -30% less than barite muds.
Use of Hematite muds can result in higher rates of penetration
Less Hematite weighting agent than barite is required to achieve the same mud weight, which reduces mud costs
Gypsum
Gypsum are maintained with higher filtrate calcium and lower alkalinity than lime fluids to increase their inhibiting affect on clays.
Gypsum are more resistant to salt and salt water than lime fluids, as long as solids are kept in line.
Methanol
Methanol is the simplest alcohol, and is a light, volatile, colorless, flammable liquid with a distinctive odor very similar to, but slightly sweeter than, that of ethanol (drinking alcohol). At room temperature, it is a polar liquid, and is used as an antifreeze, solvent & fuel etc.
Wallnut shell
Good hydrophilic, resistant to oil immersed.
High hardness , wear resistance, and good pressure resistance.
Easy to backwashing and regeneration . It can be directly used for backwashing before filtering
Propane
Butane
UREA
Urea is a very important for enhancing the agriculture production. Iran being rich in Hydrocarbon has lot of surplus to offer. India needs much more than it can produce. PSUs and Canalysing Agencies in India have been the sole suppliers of imported Urea. Recently Govt. has allowed the import for now agricultural use by Private Sector actual users.
Normal Paraffin
Normal paraffin, also known as n-paraffin or straight-chain paraffin, is a type of hydrocarbon compound that is widely used in various industries. It is a colorless, odorless, and tasteless liquid that has a high degree of purity and stability, making it an ideal choice for many applications.